Cressi Archimede II Wrist Computer

Innovative and user-friendly, the Archimedes utilizes Cressi-subs User Friendly Display System (UFDS). Its breakthrough design features extra large, easy to read characters, convenient diver changeable three volt CR2032 battery with an approximate battery life of two years at 50 dives per year, large Mode buttons and diver programmable functions.

The Archimedes 2 Computer is a multi-functional computer that can be used for air or nitrox diving. It uses the Buhlmann ZH-LB algorithm, redesigned by Randy Bohrer. It uses a 12 tissue model with tissue half-times from 5 to 640 minutes. The Archimedes is calibrated for salt water, has a measuring range of 0' to 328'(0 to 99.9 meters) in computer mode and 0' to 656' (0 to 199.9 meters) in gauge mode, and has a maximum surface time calculation of 48 hours. If altitude diving is a concern, the computer will properly adjust from 0' to 19,685'(0 to 6,000 meters). The computer can also be used in either imperial units (feet) or metric units (meters).

Computer allows for air or nitrox programming with choices of two different mixtures during the same dive with oxygen fractions from 21% to 50% with increments of 1% for the first mix and 21% to 99% for the second mix. You can make partial oxygen pressure adjustment from 14.5 psi to 23 psi (1.0 to 1.6 bar) , with increments of 1.5 psi (0.1 bar) for each of the mixes. Depending on your diving skill level, physical health and age, you can program in a safety factor for either aggressive or conservative dives profiles. Designed with safety in mind, the Archimedes 2 tracks and displays both N2 and 02 levels, bar graphs are displayed on the left and right of screen displaying tissue level status. Additionally, audible and visual alarms are featured for critical dive situations.

Your current decompression status while diving with either nitrox or air is displayed during your dive with decompression stops starting at depths as deep as 99' (30 meters) with safety stops for dives that exceed a depth of 33' (10 meters) at 10' (3 meters) , and both depths, times and date are displayed. The computer also has a variable ascent rate with four different rate levels. A programmable dive simulation can be reviewed while on the surface for safe, repetitive dive planning. Before starting your day of diving and between dives, the computer will scroll No Decompression Limits (NDL) and/or ANDL to depths down to 160' (48 meters).

The Archimedes will store up to 30 hours and 60 dives into its memory. This logbook function has three data displays for each dive, has a memory of total number of dives, hours spent underwater and maximum depth reached. With the Archimedes PC downloadable interface, your dive profiles can easily be uploaded to a PC. The computers large characters are easy to read in low light conditions with a high intensity back light that can be activated by a push of a button and stays on for five seconds. The Archimedes is the perfect multi-functional dive computer for the recreational as well as the professional diver.

With all these features for safe diving you can also use the computer in a gauge only mode. This and the general rest function are great features for the dive center when computer is used for dive training, in confined water sessions or for multiple diver use in one day for open water sessions. The gauge function gives current depth, maximum depth, dive time, ascent rate and time of day. The gauge function can be used to depths from 0' to 656' (0 to 199.9 meters). ). For added protection the computer comes with a replaceable protective screen guard for the computer display.

The instrument is housed in a small, modern shaped wrist boot, made from durable materials that guarantee protection from shocks, scratches and which, at the same time, is very lightweight.